2250 issues...need advice
11-12-2017, (Subject: 2250 issues...need advice ) 
Post: #8
RE: 2250 issues...need advice
(11-12-2017 )Beaver Wrote:  
(11-12-2017 )Squish099 Wrote:  Boost sensor in on the intake, driver's side, sits behind/underneath the wiring harness
So the IMap sensor then...right?

Single bolt, with slotted hold down, holds the sensor into the intake has plastic "cage" over the sensor tip, could be call imap.. Also the exhaust back pressure sensor on front top side of exhaust manifold..
replyreply


Messages In This Thread
RE: 2250 issues...need advice - Squish099 - 11-12-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.