2250 issues...need advice

[Beaver]

(11-12-2017 )Squish099 Wrote:  

(11-12-2017 )Beaver Wrote:  

(11-12-2017 )Squish099 Wrote:  Boost sensor in on the intake, driver's side, sits behind/underneath the wiring harness

So the IMap sensor then...right?

Yup changed that 1 and the delta-p sensor. Ran a little better but still bad
Single bolt, with slotted hold down, holds the sensor into the intake has plastic "cage" over the sensor tip, could be call imap.. Also the exhaust back pressure sensor on front top side of exhaust manifold..