Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Here’s where I am at, what would you guys do?

new reply
Here’s where I am at, what would you guys do?
11-12-2017, (Subject: Here’s where I am at, what would you guys do? ) 
Post: #6
Hammerhead Offline
Kookoo for Cocoa Puffs  (1922 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1922 thank(s) in 741 post(s)
RE: Here’s where I am at, what would you guys do?
(11-12-2017 )Rawze Wrote:  Replace the A/C belt and its tensioner too.

Yup, now is the time. If I was home, I'd send you my instal/removal tool to borrow.
I'd also remove the crank position/speed sensors and anti-sieze the bolts and lube the sensors well so if you ever need to replace them, they are "prep'd" to not fight you.
I'd maybe consider doing the front engine mounts while you have simple access as well.

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
 Thanks given by: JMBT
new reply


Messages In This Thread
RE: Here’s where I am at, what would you guys do? - Hammerhead - 11-12-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication