Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / 2250 issues...need advice

new reply
2250 issues...need advice
11-12-2017, (Subject: 2250 issues...need advice ) 
Post: #13
Billdozer2 Offline
Established  (119 Likes)  **

 		Posts: 209
Joined: Feb 2016
Thanks: 34
Given 119 thank(s) in 75 post(s)
RE: 2250 issues...need advice
My 2250 shakes a bit while using the jakes if I haven't used the jakes in a while. Like after driving though a town that doesn't allow jakes. After I've used the jakes a couple times on full strength, the shaking stops.

On full strength at 1500 rpms, the boost is a little over 30 psi. (Tough to tell actual psi on my Volvo gauge.)

User's Signature: 2013 Volvo 670 with Big Red under the hood
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: 2250 issues...need advice - Billdozer2 - 11-12-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication