S.A.S. Signal j1939 shuts down a truck?
11-19-2017, (Subject: S.A.S. Signal j1939 shuts down a truck? ) 
Post: #2
RE: S.A.S. Signal j1939 shuts down a truck?
Without some actual engine fault codes it will be difficult to find out what it likely is.

Another reason why these engines should never shutdown and refuse to run at all. Derates I can see,.. even some severe derates to protect engine ok,..but refusing to run at all over emissions and/or abs is ridiculous and completely unsafe!.


First, make sure you have coolant above the minimum level, next make sure you have oil pressure building up when cranking it. After that, its anyones guess if you can't find out what codes it is throwing.

BTW: custom tuning the ecm, even if it is kept legal can eliminate most of those ridiculous shutdowns for those who are curious.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: cspence478


Messages In This Thread
RE: S.A.S. Signal j1939 shuts down a truck? - Rawze - 11-19-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.