| Ecm replacement... |
| 11-21-2017, (Subject: Ecm replacement... ) Post: #1 | |||
| |||
| Ecm replacement... I have a friend I'm going to link up with and try to get to the bottom of his J1939/ no primer pump/ SAS signal issue. His truck currently won't start, it will turn over but not start. I have Insite, all sorts of adapters to plug into the ECM and etc... but if we can't find a problem in the wiring, and all the relays and fuses check out... it could be a faulty ecm So since I have insite, wouldn't there be a way for me to load the the program back into the ecm? I talked to a programmer guy in AR today and he said MM stood for "Mad Money"... I couldn't do anything but laugh... but he was like "if you have insite why are you calling me, you can load the file yourself"... ? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Ecm replacement... - Kid Rock - 11-21-2017 RE: Ecm replacement... - snailexpress - 11-21-2017, RE: Ecm replacement... - Kid Rock - 11-22-2017, RE: Ecm replacement... - Rawze - 11-22-2017, RE: Ecm replacement... - Kid Rock - 11-23-2017, RE: Ecm replacement... - Kid Rock - 11-23-2017, RE: Ecm replacement... - Waterloo - 11-24-2017, RE: Ecm replacement... - Starlight - 11-24-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.