Cm 2250 debacle

[Rig Wrench]

(12-10-2017 )Rawze Wrote:  CM2250 should peak at 36 psi. It is the CM2350 that only needs about 32-33.

Monitor the engine state parameter and see what has control of the fueling.

Understood.
So I grabbed my computer to take a ride and monitor it, I noticed now that its cold its gained 10-15 psi on the gage. My battery died so I couldn't monitor it. But once it got up to temp. It seemed to lay down again. I'll charge up and try again