Excessive crankcase pressure?
12-11-2017, (Subject: Excessive crankcase pressure? ) 
Post: #9
RE: Excessive crankcase pressure?
(12-11-2017 )dhirocz Wrote:  ...already have the new element.

This problem didn't start until the last thousand miles or so ago. Maybe less.

Could be cam seals...doubt it though. I replaced the cams and bearings recently, and the seals were replaced at that time. You never know, dumber things have happened...

I'll upload pics shortly.

MY take on it is when the bearings in the head are shot,... so it the head.

Leakage down the side of the engine cover is something else. make sure the gasket is good and it is torqued properly.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Excessive crankcase pressure? - Rawze - 12-11-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.