| Replacing o ring fuel line into head |
| 12-13-2017, (Subject: Replacing o ring fuel line into head ) Post: #2 | |||
| |||
| RE: Replacing o ring fuel line into head You abaolutely have to relieve the pressure. Do this by loosening the line between the fuel pump and rail at the rail end. 35ftlb is the tension for it. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Replacing o ring fuel line into head - Rounded_nut - 12-13-2017, RE: Replacing o ring fuel line into head - Signature620 - 12-13-2017 RE: Replacing o ring fuel line into head - Rounded_nut - 12-13-2017, RE: Replacing o ring fuel line into head - simon999 - 12-13-2017, RE: Replacing o ring fuel line into head - Rawze - 12-13-2017, RE: Replacing o ring fuel line into head - Rounded_nut - 12-13-2017, RE: Replacing o ring fuel line into head - Signature620 - 12-14-2017, RE: Replacing o ring fuel line into head - Rawze - 12-14-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.