| Steer and drive hub nut size? |
| 12-18-2017, (Subject: Steer and drive hub nut size? ) Post: #4 | |||
| |||
| RE: Steer and drive hub nut size? I went to the dealer, had them look up the nuts for the steer and drive axles, and measured them so I could order the right sockets. Take note if they are 6 or 8 point too. Bought new OTC sockets on eBay. If you change to pro-torque nuts, the sizes will change too. You will need the part numbers for the factory nuts to cross over to the pro torque part numbers. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Steer and drive hub nut size? - DosGatos - 12-17-2017, RE: Steer and drive hub nut size? - Rawze - 12-17-2017, RE: Steer and drive hub nut size? - pearce trucking - 12-18-2017, RE: Steer and drive hub nut size? - dhirocz - 12-18-2017 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.