blown engine
12-21-2017, (Subject: blown engine ) 
Post: #12
RE: blown engine
liner can't drop that far unless step broke. Sounds suspicious.

I would have gone with a short block and pulled the liners out of it, shimmed them to 0.014", then put on a new head if it were mine. Guess i am just stubborn to trust a factory reman engine these days.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Hammerhead , hhow55 , snailexpress , Running rough , Midland


Messages In This Thread
blown engine - slowpoke - 12-13-2017,
RE: blown engine - simon999 - 12-13-2017,
RE: blown engine - Rawze - 12-13-2017,
RE: blown engine - slowpoke - 12-13-2017,
RE: blown engine - slowpoke - 12-13-2017,
RE: blown engine - Rawze - 12-13-2017,
RE: blown engine - dhirocz - 12-14-2017,
RE: blown engine - slowpoke - 12-20-2017,
RE: blown engine - Nilao - 12-20-2017,
RE: blown engine - seldomseen - 12-21-2017,
RE: blown engine - slowpoke - 12-21-2017,
RE: blown engine - Rawze - 12-21-2017
RE: blown engine - slowpoke - 12-21-2017,
RE: blown engine - Mr Hagg - 12-21-2017,
RE: blown engine - Hammerhead - 12-22-2017,
RE: blown engine - slowpoke - 12-21-2017,
RE: blown engine - dhirocz - 12-23-2017,
RE: blown engine - slowpoke - 12-23-2017,
RE: blown engine - Rawze - 12-23-2017,
RE: blown engine - Rawze - 12-24-2017,
RE: blown engine - slowpoke - 12-24-2017,
RE: blown engine - redbeard - 12-24-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.