broke a Exhaust bolt

[redtick]

Center punch it then drill with a small bit all the way through the bolt. Soak it with 50\50 mix of diesel and Atf. Let set a couple of hours then use the right size bit for the ease out you are using. Keep spraying the mix as you drill. The heat will help draw the mix into the threads. Let it cool after you get the hole in the bolt. Then use the ease out. Rules are always drill in the center. Keep the bit wet and straight. Never force the ease out .. If you break the ease out. Try using a chisel in the opposite direction to remove it. Sorry I'm on my phone.