Cm2250 boost pressure fault

[iceman]

(12-26-2017 )Rawze Wrote:  

(12-25-2017 )iceman Wrote:  https://youtu.be/pUSzS3vxBEo

Is this guys information correct? What is the proper location of part number 4928594, and does it change from the cm 2250 to the 2350? Quick serve seems to show it next to the Differential pressure sensor.

NO!!!!! HIS VIDEO IS INCORERECT!!!!!!!
NO!!!!! HIS VIDEO IS INCORERECT!!!!!!!
NO!!!!! HIS VIDEO IS INCORERECT!!!!!!!

That IS a pressure sensor BUT IT IS NOT THE EXHAUST GAS PRESSURE SENSOR!!!! - THE PART LOCATED AT POSITION # 39 IN THAT DRAWING IS THE EGR GAS PRESSURE SENSOR!!!


I left a comment on his video...

Rawze Wrote:THAT IS NOT THE EXHAUST GAS PRESSURE SENSOR!!!!! --- YOU ARE REPLACING AND FIDDLING WITH THE EGR GAS PRESSURE SENSOR!!!! -- THEY ARE 2 DIFFERENT PRESSURE SENSORS!!!!! --- THE EXHAUST GAS PRESSURE SENSOR IS ACTUALLY LOCATED AT THE TOP OF THE THERMOSTAT HOUSING!!!!!!! --- PLEASE FIX YOUR VIDEO SO THAT PEOPLE ARE NOT MIS-INFORMED!!!!!!!

http://rawze.com/forums/showthread.php?t...40#pid1340

Looks like the video was taken down. Couple questions. I'm in the process of doing an Egr tuneup per your recommendation (230,000 miles). IMAP was clogged,doser was clogged, and dp sensor looked horrible underneath. Would you suggest replacing the gas pressure sensor, and the exhaust gas pressure sensor? I also can't seem to find the correct part number for that exhaust gas pressure sensor that is located on top of the thermostat housing?? Thanks for the help on this. Truck was not showing any codes I can only imagine what would eventually have shown up.