Service Ranger 4...Bueller?........Bueller?........Anyone?......Anyone?

[Mr Hagg]

Need to look at insite first to make sure all parameters are maxed out. Like the gear down protection. If it is set low need to either disable it or turn it to max speed. Also there is one for heavy load RPM low and high setting. Try and put 2100 in some will not take it as 1800 is max. Try that should help some. As far as the service ranger not sure. I have the service ranger 3 and had to get another pass word to make it where you can change shift points. Not sure if you have the option open on the one you have but if you do the left hand corner you will see tabs open it i think programming or something Ill have to look and see. But it will say shift points. It will also allow you to say which gear you start out in etc.. but if your version of service ranger is not open for that it you will not see that option.