broke a Exhaust bolt
12-27-2017, (Subject: broke a Exhaust bolt ) 
Post: #13
RE: broke a Exhaust bolt
I've done some cat manifold studs by sticking a flat washer over the stud. One that just fits over. Then I find a nut to put on top of this and mig or now I tig weld up the center of the nut to the stud. Let cool completely and put a wrench on this nut and work it back and forth. I've had great success doing this.
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: broke a Exhaust bolt - Dtruck - 12-27-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.