| Proper engine warm up procedure? |
| 01-07-2018, (Subject: Proper engine warm up procedure? ) Post: #2 | |||
| |||
| RE: Proper engine warm up procedure? Drain your coolant and add a block heater, not hard in a red engine. At 9 degrees last week my truck fired right up and was at operational temp within 40 minutes. I don't idle about normal range (700) until it gets to 165°, try not to drive until it is at least 180°. There is a plate about 2" behind water pump to install block heater; cost you about 70 dollars; had to heat my old one up to soften up o-ring. User's Signature: "KW is my choice of trucks" | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Proper engine warm up procedure? - jimeneztrans84 - 01-07-2018, RE: Proper engine warm up procedure? - Ragindirt - 01-07-2018 RE: Proper engine warm up procedure? - jimeneztrans84 - 01-07-2018, RE: Proper engine warm up procedure? - Rawze - 01-07-2018, RE: Proper engine warm up procedure? - jimeneztrans84 - 01-07-2018, RE: Proper engine warm up procedure? - JMBT - 01-07-2018, RE: Proper engine warm up procedure? - Magard - 01-07-2018, RE: Proper engine warm up procedure? - iceman - 01-17-2018, RE: Proper engine warm up procedure? - jimeneztrans84 - 01-17-2018, RE: Proper engine warm up procedure? - scottydogtruck - 01-17-2018, RE: Proper engine warm up procedure? - Rawze - 01-17-2018, RE: Proper engine warm up procedure? - JMBT - 01-17-2018, RE: Proper engine warm up procedure? - the missing link - 01-18-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.