In-frame, what to do with ECM? Need guidance

new reply

Threaded Mode | Linear Mode

In-frame, what to do with ECM? Need guidance

04-13-2016, (Subject: In-frame, what to do with ECM? Need guidance )

Post: #7

Signature620 Offline

Contributing V.I.P. (840 Likes)

Posts: 737
Joined: May 2015

Thanks: 625
Given 840 thank(s) in 449 post(s)

RE: In-frame, what to do with ECM? Need guidance

That just sounds like salesman talk for updating the calibration to the latest revision. There's no reason at all to touch the calibration if it was stable before the rebuild & the shop is putting all your block off plates back where they were.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

In-frame, what to do with ECM? Need guidance - Waterloo - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - in2trux - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Rawze - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Waterloo - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - snailexpress - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Waterloo - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Signature620 - 04-13-2016

RE: In-frame, what to do with ECM? Need guidance - Waterloo - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - hhow55 - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Waterloo - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Wiseman - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - bazdan902 - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - mkmac - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Waterloo - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - stevesparts - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Unilevers - 04-13-2016,

RE: In-frame, what to do with ECM? Need guidance - Waterloo - 04-14-2016,

RE: In-frame, what to do with ECM? Need guidance - snailexpress - 04-14-2016,

RE: In-frame, what to do with ECM? Need guidance - Waterloo - 04-14-2016,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.