Pulling Injectors on a 2250

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-28-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Pulling Injectors on a 2250

01-11-2018, (Subject: Pulling Injectors on a 2250 )

Post: #3

ntadiesel Offline

Offline

Contributing Member (5 Likes)

Posts: 18
Joined: Feb 2016

Thanks: 3
Given 5 thank(s) in 3 post(s)

RE: Pulling Injectors on a 2250

They will not leak as much fuel as a cm871 due to the common injector design. You can also minimize the amount of fuel that leaks in by removing the the return banjo from the head and remove no.1 first then you should see the fuel from the return draining out. Just be careful of the pressure in the common rail as the can hold allot of pressure even if the engine has been switch off for a couple of hours.

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

Pulling Injectors on a 2250 - JMBT - 01-11-2018,

RE: Pulling Injectors on a 2250 - Rawze - 01-11-2018,

RE: Pulling Injectors on a 2250 - ntadiesel - 01-11-2018

RE: Pulling Injectors on a 2250 - JMBT - 01-11-2018,

RE: Pulling Injectors on a 2250 - Rawze - 01-11-2018,

RE: Pulling Injectors on a 2250 - Starlight - 01-11-2018,

RE: Pulling Injectors on a 2250 - Hammerhead - 01-12-2018,

RE: Pulling Injectors on a 2250 - JMBT - 01-12-2018,

RE: Pulling Injectors on a 2250 - Hammerhead - 01-12-2018,

RE: Pulling Injectors on a 2250 - simon999 - 01-12-2018,

RE: Pulling Injectors on a 2250 - t700 - 01-12-2018,

RE: Pulling Injectors on a 2250 - JMBT - 01-12-2018,

RE: Pulling Injectors on a 2250 - Rawze - 01-13-2018,

RE: Pulling Injectors on a 2250 - Hammerhead - 01-13-2018,

RE: Pulling Injectors on a 2250 - JMBT - 01-13-2018,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design