Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Cold start idle??

new reply
Cold start idle??
01-12-2018, (Subject: Cold start idle?? ) 
Post: #1
jimeneztrans84 Offline
Established  (111 Likes)  **

 		Posts: 424
Joined: Jan 2016
Thanks: 0
Given 111 thank(s) in 64 post(s)
Cold start idle??
When I cold start my cm2250 it always jumps up from 610 down to 580 untill it reaches 100 coolent temp then i high idle till it gets about 150 before I take off. After truck is warmed up to regular operating temp it doesn't jump from 610 to 580 just stays still smooth idle at 600. Is this normal at cold start idle?
Return to Top | find
replyreply
new reply


Messages In This Thread
Cold start idle?? - jimeneztrans84 - 01-12-2018
RE: Cold start idle?? - Rawze - 01-12-2018,
RE: Cold start idle?? - Magard - 01-13-2018,
RE: Cold start idle?? - JMBT - 01-13-2018,
RE: Cold start idle?? - Magard - 01-13-2018,
RE: Cold start idle?? - Rawze - 01-13-2018,
RE: Cold start idle?? - Rawze - 01-13-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication