CM-871 Overhead...
01-19-2018, (Subject: CM-871 Overhead... ) 
Post: #33
RE: CM-871 Overhead...
(01-17-2018 )DDlighttruck Wrote:  Gotcha, that makes perfect sense.

I ordered a couple socket sets and feeler gauges this morning from the tool truck. I forgot to order T handle allen wrenches. I should have everything else needed, so damn you I may do it myself the first time. Thanks for the encouragement.

Hehe, let me know when you plan to do it, and if I'm not busy you know you can call and I'll walk you through it...
Or you could just get a load out west and we'll drink beer and I'll watch you do it and give you pointers along the way. Important ones, like "No, you lift the tab on the beer this way and you don't get grease from your finger on the part of the top you put your lips in when you dink it!"


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply
 Thanks given by: Rawze , Roysbigtoys , the missing link , DDlighttruck


Messages In This Thread
CM-871 Overhead... - Waterloo - 10-20-2017,
RE: CM-871 Overhead... - Rawze - 10-22-2017,
RE: CM-871 Overhead... - JMBT - 10-22-2017,
RE: CM-871 Overhead... - Rawze - 10-22-2017,
RE: CM-871 Overhead... - Rawze - 01-16-2018,
RE: CM-871 Overhead... - Hammerhead - 01-19-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.