Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Injector leak test

new reply
Injector leak test
04-14-2016, (Subject: Injector leak test ) 
Post: #20
Sergiu Offline
HMR-Contrinbuting V.I.P.  (37 Likes)  *****

 		Posts: 80
Joined: Feb 2016
Thanks: 191
Given 37 thank(s) in 17 post(s)
RE: Injector leak test
(04-13-2016 )Peterbilt387 Wrote:  Hello,i have a PETERBILT 387 with isx 2008,i did the leak test and i found between Aand B bubbles, i replaced injector number 3. Everything fine,i was driving the truck for a pick-up and back to my yard,i left the engine to idle for 3 minutes and start shaking the engine and worst then befor to replace the 3th injector. Did again the leak test and i got bubbles again but now i didn't bar it to find out exactly witch one is leaking.when i did the first time leak test it was leaking only between A and B.thank you in advance

It may be that you changed the wrong injector. Don't know for sure, waiting for knowing guys
Return to Top | find
replyreply
new reply


Messages In This Thread
Injector leak test - Coco620 - 04-09-2016,
RE: Injector leak test - mkmac - 04-09-2016,
RE: Injector leak test - Unilevers - 04-09-2016,
RE: Injector leak test - Rawze - 04-10-2016,
RE: Injector leak test - Rawze - 04-10-2016,
RE: Injector leak test - Unilevers - 04-12-2016,
RE: Injector leak test - Sergiu - 04-14-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication