| Burning oil after new head install |
| 01-30-2018, (Subject: Burning oil after new head install ) Post: #6 | |||
| |||
| RE: Burning oil after new head install U sure it's using the oil and not leaking it? I caught a leak out of the rear cam cover before... Might have a stuck ring since the head was off? Other than that, I'm curious if it's blowing out the exhaust. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - JMBT - 01-30-2018, RE: Burning oil after new head install - Rawze - 01-30-2018, RE: Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - Rawze - 01-31-2018, RE: Burning oil after new head install - dhirocz - 01-30-2018 RE: Burning oil after new head install - IrishKW - 01-31-2018, RE: Burning oil after new head install - IrishKW - 01-31-2018, RE: Burning oil after new head install - Rawze - 01-31-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.