Engine Monitoring
02-03-2018, (Subject: Engine Monitoring ) 
Post: #4
RE: Engine Monitoring
I have the ScanGauge D (not KR). If you get one make sure you go through the manual and do the procedure to email them the J1939 info it captures.
They will email you back a list of additional X-Codes you can program into the ScanGauge.
Having done that I can monitor lots of additional information from the engine and the emissions system. I can read DPF pressures in, out and differential. DPF temperatures. DOC temperatures, NOx sensors, fuel pressure both high and low. And much more.
replyreply
 Thanks given by: Rawze , hhow55 , DLC , gatow900


Messages In This Thread
Engine Monitoring - DLC - 01-21-2018,
RE: Engine Monitoring - Moose - 01-21-2018,
RE: Engine Monitoring - DLC - 02-03-2018,
RE: Engine Monitoring - uncleal13 - 02-03-2018
RE: Engine Monitoring - DLC - 02-05-2018,
RE: Engine Monitoring - kryten - 02-05-2018,
RE: Engine Monitoring - DLC - 02-17-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.