My truck and it's shenanigans.
02-13-2018, (Subject: My truck and it's shenanigans. ) 
Post: #14
RE: Cylinder head swap
Read through these recommendations carefully....
http://rawze.com/forums/showthread.php?t...6#pid10886

Whoever is doing the work, MAKE DAMN SURE they ...

* Ensure the liner height is at 0.014" - 0.015" instead of the factory 0.010" among all the other recommendations mentioned on this forum,.. or you will be at risk to have a shortened engine life.

Also for more info and some extra info, you can read through the thread I did when I helped Nilao out here at the house here...
http://rawze.com/forums/showthread.php?t...91#pid7491

And also there is my youtube engine rebuild series where I talk about all these things in great detail along the way during the process.




User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: gatow900 , marek4792 , zero4


Messages In This Thread
RE: Cylinder head swap - Rawze - 01-30-2018,
RE: Cylinder head swap - Rawze - 01-31-2018,
RE: Cylinder head swap - JMBT - 02-01-2018,
RE: Cylinder head swap - rrod - 02-12-2018,
RE: Cylinder head swap - Rawze - 02-13-2018
RE: Cylinder head swap - Rawze - 02-16-2018,
RE: Cylinder head swap - Unilevers - 02-16-2018,
RE: Cylinder head swap - Unilevers - 02-17-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.