Liner protrusion |
02-22-2018, (Subject: Liner protrusion ) Post: #3 | |||
| |||
RE: Liner protrusion You can’t visibly see 2 thousandth of fretting. There is a reason the proper way to measure it is to put a liner in without the o-ring and compress it with a liner seating tool. Then measure it with a dial indicator. If it’s fretted it will show up. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Liner protrusion - Joesixpack - 02-21-2018, RE: Liner protrusion - Unilevers - 02-21-2018, RE: Liner protrusion - Wiseman - 02-23-2018, RE: Liner protrusion - Nilao - 02-22-2018 RE: Liner protrusion - Joesixpack - 02-23-2018, RE: Liner protrusion - Signature620 - 02-22-2018, RE: Liner protrusion - tree98 - 02-22-2018, RE: Liner protrusion - Hammerhead - 02-23-2018, RE: Liner protrusion - Signature620 - 02-23-2018, RE: Liner protrusion - schISM - 02-23-2018, RE: Liner protrusion - Rawze - 02-24-2018, RE: Liner protrusion - Wiseman - 02-23-2018, RE: Liner protrusion - Joesixpack - 03-02-2018, RE: Liner protrusion - Unilevers - 03-03-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.