Liner protrusion

[Joesixpack]

(02-22-2018 )Nilao Wrote:  You can’t visibly see 2 thousandth of fretting. There is a reason the proper way to measure it is to put a liner in without the o-ring and compress it with a liner seating tool. Then measure it with a dial indicator. If it’s fretted it will show up.

Well yeah, the 9 thou is in the block compressed. There's ALSO no visual indication that there is any fretting in the fine tooling groves on the ledge anywhere.

Its going back together as is. Couldn't find a cutting tool locally and Monaco is out of stock.

Guess I'll find out if it lasts.

The head on the other hand had cracks from the injector holes to the valves in every hole except #1. So there's a new head going on. So if I do see some pressuring I'll know where it's from! LOL