Driveshaft alignment

[dhirocz]

Mine were slotted to allow forward/rearward movement, but none side to side. Mine needed to move to the drivers side by a good bit.

No more odd shakes and vibrations! Rides like a new truck, under a load. Makes me wonder if the drives were swapped at one point, it's hard to think that misalignment might have been factory...but then again, maybe not.

I haven't noticed any significant wear in the torque rods that would allow it to be off that much, however, I plan on upgrading them later in the year. I'll recheck the alignment at that time.