| N14 Injector or Injector wiring problem |
| 03-02-2018, (Subject: N14 Injector or Injector wiring problem ) Post: #9 | |||
| |||
| RE: N14 Injector or Injector wiring problem I removed injector wiring pass through to directly ohm out injector only to find that the clip on the Deutsch connector on the injector wiring was MIA. The injector ohmed out ok. I'm going to get new wiring harness and pass throughs. I guess I'll have to get a new injector or is there someplace I could get a new solenoid with better wiring? User's Signature: The fastest way to learn is to make a mistake. If it costs me $ I learn pretty quickly. It's cheaper to learn from someone else's mistakes. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
N14 Injector or Injector wiring problem - DLC - 02-26-2018, RE: N14 Injector or Injector wiring problem - the missing link - 02-26-2018, RE: N14 Injector or Injector wiring problem - hhow55 - 02-26-2018, RE: N14 Injector or Injector wiring problem - the missing link - 02-27-2018, RE: N14 Injector or Injector wiring problem - Chamberpains - 02-28-2018, RE: N14 Injector or Injector wiring problem - DLC - 02-28-2018, RE: N14 Injector or Injector wiring problem - Signature620 - 02-28-2018, RE: N14 Injector or Injector wiring problem - Chamberpains - 02-28-2018, RE: N14 Injector or Injector wiring problem - DLC - 03-02-2018 RE: N14 Injector or Injector wiring problem - DLC - 03-26-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.