Turbo acuator code 2387

[Rawze]

(03-04-2018 )seldomseen Wrote:  Also I found a good related video about installing a turbo actuator without having to use cummins insight to install and calibrate very good video ..

https://www.youtube.com/watch?v=mbSnf5DTkzE

If someone can come up with an official cummins procedure then I will support this but so far, I am coming up with a blank and there fore do not agree with this video.

Here is the official procedure...
https://quickserve.cummins.com/qs3/pubsy...rix13.html

It clearly shows that you must use the insite software for it to be done properly.

===

Getting one's self off the side of the road and no computer,.. I would try it,.. no harm if it gets you going. On the other hand, I would still remove the actuator later and get it calibrated correctly as soon as I could get it somewhere to get it done right though.