Turbo rebuild |
03-05-2018, (Subject: Turbo rebuild ) Post: #6 | |||
| |||
RE: Turbo rebuild You might want to give those folks a call. I did, and they are quite a bit cheaper with a one day turn around. I asked all the questions I knew to ask and it sounds legit. I'll be sending my spare out there to get done next time I run through. Apparently, they have the tools needed to check actuators as well. They will also high speed balance and clean it up all pretty looking and new...I'd bet Cummins doesn't exactly balance their remans very well (if at all) User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Turbo rebuild - dhirocz - 03-01-2018, RE: Turbo rebuild - Rawze - 03-01-2018, RE: Turbo rebuild - dhirocz - 03-01-2018, RE: Turbo rebuild - simon999 - 03-05-2018, RE: Turbo rebuild - Wiseman - 03-05-2018, RE: Turbo rebuild - dhirocz - 03-05-2018 RE: Turbo rebuild - Chamberpains - 03-05-2018, RE: Turbo rebuild - simon999 - 03-05-2018, RE: Turbo rebuild - tree98 - 03-05-2018, RE: Turbo rebuild - Signature620 - 03-06-2018, RE: Turbo rebuild - Zapah - 08-23-2018, RE: Turbo rebuild - pearce trucking - 08-24-2018, RE: Turbo rebuild - Zapah - 08-24-2018, RE: Turbo rebuild - Nostalgic - 08-24-2018, RE: Turbo rebuild - barf - 07-25-2021, RE: Turbo rebuild - tree98 - 07-25-2021, RE: Turbo rebuild - Chamberpains - 07-25-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.