POR 15
03-12-2018, (Subject: POR 15 ) 
Post: #5
RE: POR 15
Mine was used kind of badly before I got it...you can tell. It's mushroomed a bit where you can tell someone was slamming it into the kingpin. Air slide leaks, base is rusted up pretty good...I'm not opposed to rebuilding it necessarily, but I'm really waiting to see if there is a cost effective way to just replace the whole unit if nothing for liability and peace of mind.


User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker
Overhauled @ 927k
replyreply


Messages In This Thread
POR 15 - Truck007 - 03-11-2018,
RE: POR 15 - Rawze - 03-11-2018,
RE: POR 15 - dhirocz - 03-11-2018,
RE: POR 15 - Chamberpains - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018
RE: POR 15 - Chamberpains - 03-12-2018,
RE: POR 15 - Rawze - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018,
RE: POR 15 - Rawze - 03-13-2018,
RE: POR 15 - Truck007 - 03-13-2018,
RE: POR 15 - Mrkentee - 03-29-2018,
RE: POR 15 - dhirocz - 03-30-2018,
RE: POR 15 - Mrkentee - 03-30-2018,
RE: POR 15 - stevesparts - 04-01-2018,
RE: POR 15 - Mrkentee - 04-01-2018,
RE: POR 15 - dhirocz - 04-01-2018,
RE: POR 15 - stevesparts - 04-02-2018,
RE: POR 15 - serv - 04-02-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.