Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Rpm range?

new reply
Rpm range?
03-13-2018, (Subject: Rpm range? ) 
Post: #13
Contributing Memberberrytrucking94 Offline
Contributing Member  (11 Likes)  ****

 		Posts: 36
Joined: Sep 2016
Thanks: 37
Given 11 thank(s) in 8 post(s)
RE: Rpm range?
Driven cats, much different than any isx ive driven.. a cat can take lugging better than an isx in my opinion. Hauling heavy with 3.90s my isx is happiest between 1600-1900 while going through gears. Truck will turn 2200 which gives plenty of room for using rpm to advantage on hills, hard pulls etc.

Lugging my isx will give high turbo temps and too much vibration. Higher(but safe) rpms are friendlier than some ppl think :big_smile2:
Return to Top | find
replyreply
 Thanks given by: Rounded_nut
new reply


Messages In This Thread
Rpm range? - Rockycoon75 - 03-13-2017,
RE: Rpm range? - flonly - 03-13-2017,
RE: Rpm range? - Rockycoon75 - 03-13-2017,
RE: Rpm range? - flonly - 03-13-2017,
RE: Rpm range? - Brock - 03-13-2017,
RE: Rpm range? - DKenworth - 03-14-2017,
RE: Rpm range? - Waterloo - 03-14-2017,
RE: Rpm range? - Brock - 03-14-2017,
RE: Rpm range? - Rawze - 03-14-2017,
RE: Rpm range? - 389driver - 03-14-2017,
RE: Rpm range? - Rockycoon75 - 03-14-2017,
RE: Rpm range? - Chamberpains - 02-28-2018,
RE: Rpm range? - berrytrucking94 - 03-13-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication