T660 Coolant Light on
03-14-2018, (Subject: T660 Coolant Light on ) 
Post: #6
RE: T660 Coolant Light on
To test the sensor, pull it down and out the tank and get a magnetic pickup tool. Slowly go from the base to the tip and hold it there or tape it. See if the fault code goes away, it could take a couple mins for the signal to relay through the CECU to the cluster.
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: T660 Coolant Light on - Moose - 03-14-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.