OODO-Cleaning Out The Soot |
03-24-2018, (Subject: OODO-Cleaning Out The Soot ) Post: #6 | |||
| |||
RE: OODO-Cleaning Out The Soot (03-24-2018 )Waterloo Wrote: I think I would have replaced that Delta P sensor. That is one packed Venturi. Side note, these sensors don't like carb or break cleaner, best to replace. Especially the iMap sensor. I think I agree with this, I had a shop instructor tell me that carburetor cleaner is only for the metal parts/bits of the carburetor. Thin plastic and rubber parts can be disfigured and/or melt if they are soaked with these strong corrosive solutions. I do like the OP's initiative to take good care of his truck thou. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
OODO-Cleaning Out The Soot - bossboy2 - 03-24-2018, RE: OODO-Cleaning Out The Soot - Chamberpains - 03-24-2018, RE: OODO-Cleaning Out The Soot - bossboy2 - 03-25-2018, RE: OODO-Cleaning Out The Soot - Waterloo - 03-24-2018, RE: OODO-Cleaning Out The Soot - REWB - 03-24-2018 RE: OODO-Cleaning Out The Soot - dhirocz - 03-24-2018, RE: OODO-Cleaning Out The Soot - Chamberpains - 03-24-2018, RE: OODO-Cleaning Out The Soot - dhirocz - 03-24-2018, RE: OODO-Cleaning Out The Soot - Ragindirt - 03-25-2018, RE: OODO-Cleaning Out The Soot - Waterloo - 03-25-2018, RE: OODO-Cleaning Out The Soot - dhirocz - 03-25-2018, RE: OODO-Cleaning Out The Soot - bossboy2 - 03-25-2018, RE: OODO-Cleaning Out The Soot - Waterloo - 03-26-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.