Injector leak test
04-21-2016, (Subject: Injector leak test ) 
Post: #21
RE: Injector leak test
Hello all, new member here, just wanted to mention the tool that Cummins recommends for the injector leak test is a manometer, you can make one cheap using 1/4" vinyl tubing and it would make even small air leak noticeable when the water height changes in the opposed columns, Google DIY manometer
replyreply


Messages In This Thread
Injector leak test - Coco620 - 04-09-2016,
RE: Injector leak test - mkmac - 04-09-2016,
RE: Injector leak test - Unilevers - 04-09-2016,
RE: Injector leak test - Rawze - 04-10-2016,
RE: Injector leak test - Rawze - 04-10-2016,
RE: Injector leak test - Unilevers - 04-12-2016,
RE: Injector leak test - Wolff956 - 04-21-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.