POR 15 |
03-30-2018, (Subject: POR 15 ) Post: #12 | |||
| |||
RE: POR 15 I'm still on the fence. It's por15, rust bullet or chassis saver. I do plan on doing the 5th wheel at the same time, as well as run new air lines, spring eye bushings and the like. My top plate is a little rough, and while it could be rebuilt, would rather replace it. That'll be a next winter project. For now, I just rebuilt the steering axle wheel ends. I'll be doing front springs, cab mounts, torque rods, shocks and alignment here next. I believe in being thorough. I want this thing to last awhile. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
RE: POR 15 - Rawze - 03-11-2018, RE: POR 15 - dhirocz - 03-11-2018, RE: POR 15 - Chamberpains - 03-12-2018, RE: POR 15 - dhirocz - 03-12-2018, RE: POR 15 - Chamberpains - 03-12-2018, RE: POR 15 - Rawze - 03-12-2018, RE: POR 15 - dhirocz - 03-12-2018, RE: POR 15 - Rawze - 03-13-2018, RE: POR 15 - Truck007 - 03-13-2018, RE: POR 15 - Mrkentee - 03-29-2018, RE: POR 15 - dhirocz - 03-30-2018 RE: POR 15 - Mrkentee - 03-30-2018, RE: POR 15 - stevesparts - 04-01-2018, RE: POR 15 - Mrkentee - 04-01-2018, RE: POR 15 - dhirocz - 04-01-2018, RE: POR 15 - stevesparts - 04-02-2018, RE: POR 15 - serv - 04-02-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.