Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Things that may help others... / POR 15

new reply
POR 15
04-01-2018, (Subject: POR 15 ) 
Post: #14
Contributing V.I.P.stevesparts Offline
Contributing V.I.P.  (116 Likes)  ****

 		Posts: 153
Joined: Feb 2016
Thanks: 105
Given 116 thank(s) in 71 post(s)
RE: POR 15
Ok, so i had some time(bored:)) so i broke out the grinder and started to get to it..... after 2 hrs or so of grinding off the rusted spots on the frame and rear diff,and parts of the 5th wheel. WOW!!! it was worse than i thought... damn mag chloride :( but i had a little can of por15 gloss black to use up, and it was just enough to do the job. all nice and shiny now. hope it holds up as well as it looks..

User's Signature: hard to go 60 mph when the winds blowing 65+ in WY
Return to Top | find
replyreply
new reply


Messages In This Thread
POR 15 - Truck007 - 03-11-2018,
RE: POR 15 - Rawze - 03-11-2018,
RE: POR 15 - dhirocz - 03-11-2018,
RE: POR 15 - Chamberpains - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018,
RE: POR 15 - Chamberpains - 03-12-2018,
RE: POR 15 - Rawze - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018,
RE: POR 15 - Rawze - 03-13-2018,
RE: POR 15 - Truck007 - 03-13-2018,
RE: POR 15 - Mrkentee - 03-29-2018,
RE: POR 15 - dhirocz - 03-30-2018,
RE: POR 15 - Mrkentee - 03-30-2018,
RE: POR 15 - stevesparts - 04-01-2018
RE: POR 15 - Mrkentee - 04-01-2018,
RE: POR 15 - dhirocz - 04-01-2018,
RE: POR 15 - stevesparts - 04-02-2018,
RE: POR 15 - serv - 04-02-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication