Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / CM871 oil pressure

new reply
CM871 oil pressure
04-12-2018, (Subject: CM871 oil pressure ) 
Post: #2
Contributing V.I.P.Signature620 Offline
Contributing V.I.P.  (840 Likes)  ****

 		Posts: 737
Joined: May 2015
Thanks: 625
Given 840 thank(s) in 449 post(s)
RE: CM871 oil pressure
How old is your oil filter? It may be plugged. Did you 100% refit the oil pump regulator plunger in the same orientation it came out in? If fitted backwards, all pumped oil will be returned to the oil pump inlet. Did you have the oil pump housing apart other than the regulator?
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: CM871 oil pressure - Signature620 - 04-12-2018
RE: CM871 oil pressure - Brock - 04-12-2018,
RE: CM871 oil pressure - Rawze - 04-12-2018,
RE: CM871 oil pressure - Rawze - 04-12-2018,
RE: CM871 oil pressure - Brock - 04-12-2018,
RE: CM871 oil pressure - Brock - 04-12-2018,
RE: CM871 oil pressure - Unilevers - 04-13-2018,
RE: CM871 oil pressure - Rawze - 04-13-2018,
RE: CM871 oil pressure - Unilevers - 04-13-2018,
RE: CM871 oil pressure - Unilevers - 04-13-2018,
RE: CM871 oil pressure - Rawze - 04-21-2018,
RE: CM871 oil pressure - Rawze - 05-03-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication