help with exhaust bolts

[Rawze]

(04-25-2018 )alborz Wrote:  Thanks a lot Rawze for your reply.
When you talk about using heat, do you use it on bolt or engine block around the bolt?
and also I know you have formula for rusted bolts. If I remember correctly it was acetone with W.D 40 right?

Heat the bolt itself only.

The nut-buster formula is 50/50 mix of ATF and acetone. No product on the market beats it.

You need one of these though if you want to store it in a bottle for more than a few hours..
Link: https://amzn.to/2Wl65cv

It eats up the plastic or the acetone evaporates after a few days with anything else.