Helping Waterloo out with an inframe ...

[Rawze]

(04-26-2018 )flatfoot Wrote:  Waterloo - just curious - what does "book" say that dealer might not have done??

this was the biggest mistake they made. they did not follow this guideline ...
https://quickserve.cummins.com/qs3/pubsy...83753.html

they also did not follow this properly for the valve and injector camshaft gears. They also did not install any loc-tite 609 during the procedure...
https://quickserve.cummins.com/qs3/pubsy...88-tr.html

there was also metal debris in the flange for #6 crankshaft bearing and it did not mate properly. they also did not install any loctite 518 in the joints.
https://quickserve.cummins.com/qs3/pubsy...hopas.html

The list of mistakes is long actually and it shows a clear record of "in a hurry and not giving a shi#t!".