Helping Waterloo out with an inframe ...

[Waterloo]

Not a great concern for myself, and seeing the anti-carbon rings and my prior experience with this motor, .012 should be fine. Take into account that the original liners were all over the map, along with what the dealer had done, no machining of the block, crooked liners and running from .008 to .012... Now, at .012, the liners are even across the board, shimmed and locked in the cut block. This is something this motor has never seen, I highly doubt there will be any liner issues in the future. At least not after what I have seen and learnt. ;-)