| 09 no crank |
| 04-27-2018, (Subject: 09 no crank ) Post: #8 | |||
| |||
| RE: 09 no crank Again, not being able to see what position your switches are in could be your problem. Im not saying it is but It could be a faulty clutch switch or brake switch. They will stick in the opposite position or even flicker back and forth. Open and closed or on and off. I would get Insite to watch the switches or go old school and jumper wire them to see if it solves your problem. Then move on if it doesn't. Im only going with the switches 1st because you said pushing on the brake allows you to start the truck. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
09 no crank - big_roy - 04-26-2018, RE: 09 no crank - Chamberpains - 04-27-2018, RE: 09 no crank - big_roy - 04-27-2018, RE: 09 no crank - redbeard - 04-27-2018, RE: 09 no crank - big_roy - 04-27-2018, RE: 09 no crank - Rawze - 04-27-2018, RE: 09 no crank - big_roy - 04-27-2018, RE: 09 no crank - Chamberpains - 04-27-2018 RE: 09 no crank - big_roy - 04-27-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.