QSB 4.5 NOT START |
05-02-2018, (Subject: QSB 4.5 NOT START ) Post: #6 | |||
| |||
RE: QSB 4.5 NOT START (04-23-2016 )chrismds Wrote: Found many times working on grape harvesters that when these 4.5's are placed under any load on start-up e.g. hydraulic pumps not displacing, the engine will over fuel and blow excessive white smoke on cranking but not start! Sounds rough but spray SOME solvent into air intake on crank and will start ok........afterwards starts and stops ok! I've changed speed/position sensors, fuel pumps, ecm's, starter motors, injectors, lift pumps etc. but nothing works! Not sure why they respond so poorly to load on startup. Sound like that is potentially hard on the starter too. Maybe try to avoid having engine load while cranking? User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
QSB 4.5 NOT START - Mohanad - 04-10-2016, RE: QSB 4.5 NOT START - redbeard - 04-10-2016, RE: QSB 4.5 NOT START - Mohanad - 04-10-2016, RE: QSB 4.5 NOT START - redbeard - 04-10-2016, RE: QSB 4.5 NOT START - chrismds - 04-23-2016, RE: QSB 4.5 NOT START - Rawze - 05-02-2018 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.