Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Cam Bearings, Rebuilders Please Advise!!!

new reply
Cam Bearings, Rebuilders Please Advise!!!
05-04-2018, (Subject: Cam Bearings, Rebuilders Please Advise!!! ) 
Post: #1
Pramantha Offline
Established  (1 Likes)  **

 		Posts: 10
Joined: Apr 2018
Thanks: 13
Given 1 thank(s) in 1 post(s)
Cam Bearings, Rebuilders Please Advise!!!
I opened a 'new, fully loaded' ISX CM871 cylinder head today (ebay) and found all the cam bearings poorly aligned! Thanks to @Rawze I checked them. What do?! I want to use this head and move forward if possible, the rest is good to go.

Do I risk trying to rotate them in the bores?

Do they have to be removed and repressed in the correct alignment?

Not fun on a Friday afternoon when the head was supposed to be going on...   
Return to Top | find
replyreply
new reply


Messages In This Thread
Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication