Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Cam Bearings, Rebuilders Please Advise!!!

new reply
Cam Bearings, Rebuilders Please Advise!!!
05-04-2018, (Subject: Cam Bearings, Rebuilders Please Advise!!! ) 
Post: #5
Pramantha Offline
Established  (1 Likes)  **

 		Posts: 10
Joined: Apr 2018
Thanks: 13
Given 1 thank(s) in 1 post(s)
RE: Cam Bearings, Rebuilders Please Advise!!!
Thanks Waterloo, you are confirming my fears, these bearings are in the middle, I'm sure I can't leave them like this and that it wasn't intentional for some added oiling advantage...Just poor workmanship. With the head off pressing in replacements and getting a partial refund might be my best option...
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Cam Bearings, Rebuilders Please Advise!!! - Pramantha - 05-04-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication