Primary air gauge
05-21-2018, (Subject: Primary air gauge ) 
Post: #15
RE: Primary air gauge
If that is your problem, it would be good on your part to also pull any paneling out and physically seeing what damage it did. If it got in to and disrupted connections, then you will want to pull those connections apart, clean and repair them. Corrosion does not get better if you leave it alone. It only gets worse after you seal off the original leak. Humidity will slowly make it worse till the connection fails on you again.
replyreply
 Thanks given by: rapidisimo


Messages In This Thread
Primary air gauge - rapidisimo - 05-18-2018,
RE: Primary air gauge - tree98 - 05-18-2018,
RE: Primary air gauge - flonly - 05-18-2018,
RE: Primary air gauge - tree98 - 05-18-2018,
RE: Primary air gauge - Nilao - 05-18-2018,
RE: Primary air gauge - tree98 - 05-18-2018,
RE: Primary air gauge - tree98 - 05-18-2018,
RE: Primary air gauge - Chamberpains - 05-21-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.