Low oil pressure after shim

[Hammerhead]

(05-22-2018 )Waterloo Wrote:  The oil passage essentially shuts down to that cylinder/piston rod, pressure drops. The bearing rotates on the crankshaft, closing off the oil passage. Messy job, but with the right tools a doable PIA job to fix in your driveway. Replace them all, if that is the issue. Use plenty of Permatex Ultra Slick and be sure the clutches go in correctly. ;-)

...but that's rods n mains, he was asking about cam bearings...

Same idea, just further up the line of the oil path, but not quite as easy to change in your driveway...


look at Waterloo becomin a wrench n all...next thing ya know, he's gonna have his own YouTube channel talking crap 'bout all them sissy a$$3d Owner/Ops who won't even tackle summin as simple as a head swap! Lmao!!!