Helping Waterloo out with an inframe ...
06-03-2018, (Subject: Helping Waterloo out with an inframe ... ) 
Post: #237
RE: Helping Waterloo out with an inframe ...
(06-03-2018 )Waterloo Wrote:  ...
if not for that brake chamber cutting lose, we would have more than likely lost the motor.
...


Baah, it wasn't that bad, just a fitting that did not get tightened all the way on the supply hose at the top of the oil filter housing starting to seep pretty good.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: pearce trucking , Mrkentee


Messages In This Thread
Caveat emptor - Waterloo - 04-09-2018,
RE: Helping Waterloo out with an inframe ... - Rawze - 06-03-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.