Fan not turning on
06-11-2018, (Subject: Fan not turning on ) 
Post: #9
RE: Fan not turning on
If thats the case with cutting into the wiring to your original fan solenoid and you don't want to or don't have means to suppress the code. Then you can always plumb in a "normally open" solenoid after the factory 1's air line that runs to the fan and run your own wiring and switch in the dash.
replyreply


Messages In This Thread
Fan not turning on - earnies2 - 06-10-2018,
RE: Fan not turning on - serv - 06-10-2018,
RE: Fan not turning on - Nilao - 06-11-2018,
RE: Fan not turning on - Chamberpains - 06-11-2018
RE: Fan not turning on - Nilao - 06-12-2018,
RE: Fan not turning on - Nilao - 06-13-2018,
RE: Fan not turning on - Rawze - 07-02-2018,
RE: Fan not turning on - Nilao - 07-31-2018,
RE: Fan not turning on - Nilao - 07-31-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.