Helping Waterloo out with an inframe ...

[Nostalgic]

(06-12-2018 )Rawze Wrote:  I have seen 400hp engines with 150 liners AND 152 liners.
I have seen 450hp engines with 150 liners AND 152 liners.
I have seen 500hp engines with 150 liners AND 152 liners.
I have seen 550hp engines with 150 liners AND 152 liners.
I have seen 600hp engines with 150 liners AND 152 liners.

It is COMPLETELY RANDOM! what liners you have in your engine and cannot be determined until you pull the head off the engine and measure the tops.

Just curious - how you can tell from the top? Quickserve shows measuring the "land" below the o-ring.

I just ordered a new crank and out of frame kit for mine - 150mm, flat top liners, no grooves on the bottom, no liner shims. I would like to verify the block didn't have the wrong liners in it though.